
The range of production for pharma is:
- vertical or horizontal storage tanks, with thermoconditionig device (jacket, half pipe, dimpled coil), thermal insulated and with inner surface satin finish or mirror polished;
- preparation vessels, with thermoconditionig device (jacket, half pipe, dimpled coil),
thermal insulated and with inner surface satin finish or mirror polished (from Ra=0,8 to Ra<0,2),
with mechanical or magnetical stirrer, control panel with PLC for managing temperature, pressure,
steam, nitrogen, CIP, speed stirrer;
- mixers, with various kind of mechanichal stirrer (impeller, closs blade, anchor, ribbon, gate), with mechanical
(single or multiple) sanitary seal or magnetic stirrer with control speed;
- heat exchangers with single or double tube plate;
- sterile storage tanks, full vacuum proof, with capacity from 500 to 200.000 litres, according PED, with thermal conditioning, thermal insulation welded tank in tank;
Please click on pictures to enlarge.
 |
 |
Vessel for PW according PED
|
 |
- realization vertical or horizontal
- capacity from 500 to 100.000 litres
- wetted parts AISI 316 L
- external surfaces "scotch brite"
- inner surfaces mirror polished Ra<0,4 micron
- external insulation welded tank in tank
- satin finish 240 meshes
|
 |
 |
Preparation vessel for syrups
|
 |
- pressure exercice 3 Bar/FV
- capacity from 500 to 10.000 litres
- wetted parts AISI 316 L
- external surfaces "scotch brite"
- inner surfaces mirror polished Ra<0,3 micron
- mechanical stirrer with sanitary seal
- external insulation welded tank in tank
- with thermoconditionating system
|
 |
 |
Preparation tank for injectables
|
 |
- pressure exercice 3 Bar/FV
- capacity from 100 to 500 litres
- wetted parts AISI 316 L
- external surfaces mirror polished Ra<0,5 micron
- inner surfaces mirror polished Ra<0,2 micron
- magnetic stirrer
- external insulation welded tank in tank
- with thermoconditionating system
- Stainless steel control panel
|
 |
 |
Heat exchanger
|
 |
- realized according European rules PED 97/23 CE
- pressure design +10 Bar
- wetted parts AISI 316
- external surface satin finish 320 meshes
- inner surface mirror polish Ra<0,2 micron
|
 |
 |
Bio-fermenter
|
 |
- realized according European rules PED 97/23 CE
- pressure design +3 Bar /Full vacuum
- wetted parts AISI 316
- external surface satin finish 240 meshes or shoot peening blasted
- inner surface mirror polish Ra<0,2 micron
- with thermoconditionating jacket
- welded insulation "tank in tank
|
|